Belarus 1025/1025.2/1025.3
Section S. Controls and instruments
Control of RMU fixing mechanism
(HMU without hydraulic lift)
Lever (5) (see figure on page D 14):
• «
RMU is interlocked» — the end left-
hand position (as tractor moves)-
D20
To interlock the implement lift it to the top
utmost position by having moved power
mode control lever to the utmost rear
position and then turning it to the left-
hand end position. To unlock RMU lift
the implement and shift the lever to the
end right-hand position.
• «
RMU is unlocked » — the end right-
hand position.
Control of FDA drive
Two FDA drive switching versions may
be provided on these tractor models: - - -
- DI –aligned (see page D14);
- FDA drive switch only, see below.
FDA drive is controlled by key (2) on the
panel under the right-hand control panel.
It has three fixed positions:
•
«FDA is automatically on» —
upon pressing upper key section;
•
«FDA is off» — middle key position;
•
«FDA is switched on by force» —
upon pressing lower key section.
Upon switching FDA drive alarm lamp (1)
is on. It goes down after key (2) is put to
the middle position and at the time the
drive is switched off in the automatic
mode.
ATTENTION!
1. When operating on hard surface
roads switch FDA off (middle position of
key (2) to avoid excessive wear of tires
and drive elements.
2. Use forced FDA switching on mode
for short time only to overcome
obstacles and in the reverse mode.
3. In no way use forced FDA switching
mode at movement speed over 15
km/h.
4. Do not use FDA in the automatic
switching mode when travelling in the
reverse mode.
Note:
The electric circuit of FDA drive
control is provided with braking relay,
ensuring automatic FDA drive switching
on upon pressing interlocked wheel
brake pedals. It is installed only on the
models where FDA drive is aligned with
DI.
Summary of Contents for 1025 2008
Page 205: ......