Belarus 1025/1025.2/1025.3
Section G. Scheduled maintenance
G 33
If the tractor is equipped with pneumatic
system and operates with trailers provided
with pneumatic brakes, make the following
adjustments of the parking brake:
•
Shift lever (1) to extreme front
(disengaged) position.
•
Loosen check nut (8) and pull out pin
(6).
•
Turn lever
г
(5) so that upper edge of
groove «
В
1» of lever (4) matched upper
edge of groove «
В
2» of lever ( 9).
•
Changing length of tie-rod (10) by
turning yoke (7), couple tie-rod (10) to
lever (5) by means of pin (6), and
secure it with cotter-pin.
•
Screwing in or unscrewing bolt (2), find
position when with effort of 200 N (20 kgf)
applied to lever (1), full engagement of the
parking brake was achieved on the
second-third tooth of sector(
А
).
•
Tighten check nuts (3) and (8).
Operation 33. Oil level in casings of
“wet” brakes».
Unscrew control-filling plugs (1) and
check oil level.
Oil level in brakes’ casings should be
up to lower edges of control-filling
openings. If necessary, fill oil up to the
level.
Put plugs (1) in place.
ATTENTION! Never operate brakes
without oil or with insufficient oil level.
Summary of Contents for 1025 2008
Page 205: ......
