Belarus 1025/1025.2/1025.3
Section H. Adjustments
H18
Adjusting headlights
To have normal road illumination and for
safe tractor operation during transport
works, adjust light direction of front
headlights. Observe the following order
of headlights adjustment:
1) mark the screen as shown in the
figure below. Mark line AA of
headlights centers in the screen
at distance “h”, equal to the
height of headlights’ centers
above ground level, and line
BB1 and GG1 at distance D
(horizontal dimension between
centers of headlights).
2) Put tractor on even horizontal
terrain perpendicular to the screen
, with distance from the screen to
front headlight glass equal to 10
meters. In this case longitudinal
plane of tractor symmetry should
cross the screen along line 0-0
1
;
3) Switch on lower light and first
adjust position of one headlight
(cover another headlight with
dark cloth), than the second
headlight , having in advance
loosened their fastening on the
arm.
Light of a headlight is considered
adjusted, if center of the light spot on
the screen is 150 mm below line A-A,
and light spots from both headlights
are on the same height.
Make measurement between
headlights’ axes directly on the
tractor, with air pressure in tires
corresponding to recommended
norms.
Summary of Contents for 1025 2008
Page 205: ......
