Belarus-1025/1025.2/1025.3
During tractor operation
and inter-shift,
short-term and long-term storage, means
and methods of preservation, storage
conditions are chosen by an enterprise,
that maintains tractor in compliance with
GOST 7751-85. Inside surfaces may also
be preserved with general-purpose
preservation grease KS-U according to
Specifications TU RB 600125053.019-
2004. During outdoor storage specific
surfaces are preserved with grease
«BELA-KOR» grade
А
according to TU-
RB 600125053-020-2004.
Putting tractor into
operation after long-term
storage
Remove grease off surfaces under
preservation. Dismount protective covers,
plugs, special accessories and reinstall
earlier removed parts. Before mounting
parts clean them off grease and dust.
Drain sediment out of all vessels, fill them
with operation fluids and, if necessary, top
up to control level.
Lubricate all tractor mechanisms
according to lubrication chart. Fill fuel tanks
with fuel. De-preservation of the fuel
system and diesel cylinders is made by
starting diesel. Fill the system with cooling
fluid. Carry out scheduled maintenance.
Turn through diesel crankshaft without
supply of fuel by several turns and, making
sure crankshaft rotates properly, start
diesel for 5-10 minutes, gradually bring
crankshaft rotation speed from minimum to
rated value. Run in tractor for 15-20
minutes. Correct detected faults.
Section K. Storage regulations
Safety requirements in
preservation
The preservation production process,
comprising surfaces preparation,
deposition of preservation materials, paper
marking and cutting, packing, can be
performed only by persons who arrived at
the age of eighteen, underwent medical
examination, introduction briefing on labor
and fire safety, primary briefing on the
working place. Preservation remises and
sections should be separated from other
production premises and equipped with
plenum-exhaust ventilation. Materials used
for preservation are combustible
substances with flash temperature from
170 to 270
o
C, and should comply with
state standards, technical specifications
and have quality certificate. Conservation
materials being supplied should bear label
with material description. Perform
preservation operations in special clothes
and footwear and use individual protection
means. When performing preservation
operations, observe personal hygiene
rules, dry clean special clothes in time,
don’t wash it in emulsions, solvents,
kerosine. By the degree of impact on
human organism preservation materials
are related to moderately dangerous, so
use recommended individual protection
means while handling materials
With prolonged exposure of skin to
preservation oils, greases and liquids, it
can be injured. White spirit vapors in small
concentrations act as weak drug. Large
concentration may lead to poisoning.
Anticorrosion paper contain corrosion
inhibitors causing irritation and
inflammation of skin, mucous of nose and
eyes. Before starting work put on cotton
overalls, robe or apron, make ready
individual protection means depending on
work conditions and toxicity of substances
used. Grease hands with protection paste
(creme) and put on cotton and rubber
gloves. Before performing work, safe
conditions of which are not known, demand
to be briefed on safety engineering
regulations.
Summary of Contents for 1025 2008
Page 205: ......
