Belarus-1025/1025.2/1025.3
the cooling system, sealing of inside
surfaces, preservation of outside unpainted
engine surfaces (outside preservation), and
if hood is not provided, engine packing with
polymer film sheath. Preservation of empty
fuel tanks includes the use of volatile
inhibitors. Air purifier is cleaned and
washed, and sump is filled with operation
preservation oil.
Threaded connections of mounting
mechanism, steering trapezoids, hydraulic
systems and so on are cleaned and
greased.
Preservation
Preservation provides provisional
anticorrosion protection of tractor
assemblies and systems from ambient
exposure in the process of tractor
transportation and storage. Tractor
surfaces subject to preservation are
cleaned from mechanical staining,
degreased and dried up. Unpainted inside
and outside galvanized surfaces, specific
assemblies of tractor and cabin are
conserved with corrosion-proof oil RUST
BAN 397. SUMIDERA 397. Material
consumption is 0.02-0.03 kg per tractor.
Inside diesel surfaces are conserved after
tractor running in by filling anticorrosion
inhibitor PFINDER
АР
241. CORTEK VCI
329 via coarse filter to fill cavities with
preservation additive. Material
consumption is 0.05 kg per tractor.
Preservation of fuel tank inside surfaces is
carried out by sputtering after their
manufacture and before coating with
preservation oil RUST BAN 335. ML -5888,
instruments panel – after assembly by
sputtering corrosion-proof oil RUST BAN
397, SUMIDERA 397 on inside panel
surfaces. PTO drive ends are preserved by
greasing with corrosion-protective
Section K. Storage regulations
oil RUST BAN 335, ML -5888. Material
consumption is 0.1 kg per tractor.
Some assemblies (monocyclone, necks
of radiator and fuel tank, breathers,
cylinders’ rods) are sealed with
polyethylene sheathes. Consumption of
material is 0.66 kg per tractor.
Materials used provide protection of
tractor and its assemblies for the period of
storage and transportation within one year.
Before putting tractor into operation remove
polyethylene sheathes, clean outside
tractor surfaces off preservation material
using cloth soaked in solvent under
GOST3134-78.
Outside tractor and its assemblies
preservation is made by lubrication of
surfaces using brush or sputtering by
means of paint sprayer.
Inside tractor preservation is carried out
by filling cavities with preservation mixture
and subsequent engine operation.
Depreservation
Depreservation method is chosen
depending on preservation materials used.
Surfaces under preservation have to be
wiped with cleaning cloth soaked with low-
viscous oils, solvents, or washed away with
washing water-soluble detergents. Sealed
assembles should be stripped off insulation
materials (film, paper). Inside surfaces
under preservation need no
depreservation.
Represervation
Tractor represervation is carried out in
case conservation defects are detected in
the process of storage or upon expiration of
protection life.
Summary of Contents for 1025 2008
Page 205: ......