Belarus 1025/1025.2/1025.3
Рsection E. Preparation for operation
E6
•
switch “the ground” off
IMPORTANT!
Tractor Belarus is
equipped with hydraulic-volumetric
steering. If diesel is shut down the oil
pump driven by diesel crankshaft ,
doesn’t supply HS hydraulic system
and it automatically is transferred to the
manual steering mode, that requires
greater force applied to the steering
wheel to turn the tractor.
Running - in
IMPORTANT!
The first thirty hours of
tractor operation have great impact on
operation parameters and life of the
tractor, and its diesel in particular.
Your new tractor will demonstrate reliable
and long-term operation on condition it is
properly run-in and all required service
operations are performed in
recommended periods.
IMPORTANT!
The first fifteen hours of
operation should be spent on light
transport works, and the remaining
running-in time – on light field works
using HMS.
The signs of overload are drastic drop
of revolutions, smoking and absence
of diesel response to increase of fuel
supply. Operation at high gear under
load leads to excessive wear of diesel
friction parts.
4.
Operation of tractor at too low gear
with small load and at high diesel
revolutions will cause over consumption
of fuel. Correct choice of the gear for
each concrete operation mode saves
fuel and reduces diesel wear.
During 30-hours’ running-in observe the
following precautionary measures:
1. Monitor instruments’ readings, lubrication
system, cooling and power supply
operation. Check level of fluids and oil in
filling reservoirs.
2. Check tightness of outside fastening
connections.
3. Do not overload the diesel, do not allow
smoking drastic drop of revolutions.
Summary of Contents for 1025 2008
Page 205: ......