Belarus 1025/1025.2/1025.3
Section E. Preparation for operation
When tractor is equipped with towing
mechanism, do not couple to it half-trailers
(one-axle trailers), as well as two-axle
trailers having non-standard coupling rods.
Use
ТС
D-2V or
ТС
D-
З
V for tractors
equipped with a hydraulic lift.
Do not use rear mounting when tractor
is provided with towing mechanism!
Trailers operate at speeds determined by
road conditions. Operation with trailers
2PTS-4-887A having body capacity 20
and 45 cubic meters is allowed at speed
up to 15 km/h, as they have lower stability.
Avoid sharp turns of such trailers and
sprayer 1RMG-4 to prevent damage of
rear wheels wings.
The loop of trailers 2PTS-4-785A and
others should be fixed against rotation to
avoid restrain.
During operation yoke TCM-1J should
be fastened to trailer cross-piece by
means of two pins. Do not operate the
yoke fixed with one pin only.
Before starting work make sure, that pins
and king pin of the trailer are securely
cotter pinned. All alarm trailers’ lights
(stop lights, turning lamps, plate number
illuminations) should be switched on by
means of socket on the tractor.
Use tractor pneumatic system to control
pneumatically-driven brakes of trailers.
E
15
The use of auxiliary tractor equipment
Auxiliary tractor equipment may include
rear driving pulley, additional loads for
front axle additional charge, automatic
coupler SA-1, spacer for rear double
wheels, and other equipment.
Rear pulley is mounted on the cover of
rear PTO reduction gear (tractors
without hydraulic lift) and is driven by
PTO splined drive end. To avoid
deformation of PTO drive end, be sure
to mount the housing using four pin
and flange centering in PTO cover.
Use PTO control lever to switch the
pulley on and off.
Summary of Contents for 1025 2008
Page 205: ......
