SpinLite® Full Side Washer
1MANUL961
Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681
70
Maintenance
Motor Gearbox and Torque Plate Replacement
Remove Motor Gearbox & Torque Plate Assembly
24) Remove the base of the Cover by removing the three fasteners on the Cover Mount Plate.
See the images below.
Note:
Once the Cover Mount and Cover are removed, you will be able to access the bottom of the
Gearbox / Torque Plate Assembly.
25) If replacing the Motor Gearbox and Torque Plate, skip Step 26 and continue to the next
section. If replacing just the Torque Plate perform Step 26 and then continue to the next
section.
26) Separate the Mounting Ring and expose the mounting holes on the Gearbox, use a 5 mm hex
head socket to remove the eight fasteners and Torque Plate. See the images below.
Mount Plate
Fasteners: 1/4"-20 X3/4
& 1/4" Locking Washer
Remove the Mount Plate
fasteners to separate the Motor
Assembly from the Base Cover.
Step 24:
Torque Plate &
Mounting Ring
Flat Head Socket
M8 X 40 Black Oxide
Only remove the Torque Plate from the
Gearbox if the Torque Plate is the only
part being replaced.
Step 26:
