Bearcat BC-502/CRC, Instruction Manual

Page: 98 / 164

BC-502/CRC
98
Settings Menu
From the Home Page press the Next button to
access the Settings Menu. Next and Back buttons
are for changing pages. Buttons at the left lead
to additional setting pages. Use Select to
highlight each button for a description of the
settings associated with the highlighted button.
Press OK to enter the page.
Setup
Select to highlight the Setup button and preview
the settings. Press OK to enter the Settings
(Truck/Pump) Page.
Settings Page
Adjustments in the Settings Page can be accessed by pushing the Select
button (repeatedly) and highlighting the appropriate window for
adjustment. When a window has been
highlighted, press Edit and the four
selector buttons change for making
adjustments.
Circulate
With the Master switch OFF, the spray
system and plumbing is valved to circulate.
When circulating in CRC, the pump is
turning at Idle or Circulate speed.
By highlighting Circulate and pressing Edit,
you can use the Up and Down buttons to change to the desired speed.
Press OK after changing speed to save your settings and exit edit mode.
Manual
(ManPump) on the settings page is for setting the pump speed in manual
operation. On the Console, when the “Manual/CRC” switch is set to
Manual, the pump turns at the preset speed in the direction indicated by
the Pump switch. By highlighting ManPump and pressing Edit, you can
change the speed with the Up and Down buttons or with the GSY Inc/Dec
switch on the Console. Press OK to save and exit edit mode. Press the
Back button to return to the Home Page and the GSY now indicates MAN
for spread rate. The Manual pump speed can be seen as indicated in
GPM. Manual pump speed can also be accessed on the Home Page by