Bearcat BC-502/CRC, Instruction Manual

Page: 52 / 164

BC-502/CRC
52
LH & RH Wing Locks
Press and hold rubber coated momentary switches to unlock the wing
locks to lower wings. Wing locks automatically engage when the inner
wing is raised completely.
L. Wing & R. Wing
#1:
This raises and lowers the wing section next to the main spray bar.
#2: This raises and lowers the wing section 2
nd
out from the main spray
bar.
#3: This raises and lowers the wing section 3
rd
out from the main spray
bar.
WARNING: IF THE MASTER SWITCH AND ANY SECTION SWITCH IS
TURNED ON WHEN LOWERING A WING, THE WING WILL
TURN ON (SPRAY). THIS COULD RESULT IN INJURY,
SEVERE BURN OR DEATH TO PERSONNEL CLOSE TO THE
WING AREA
R. Burner
(Right or Lower Burner)
On – Runs and ignites burner.
Off – Stops burner.
Cool Down – After burner is stopped, run in cool down for at least two
minutes to cool burner liner . If you fail to cool down the burner, it will
melt the pump coupling and the ignition module . If the computer stops
burner for safety lockout, it will run cool-down for 45 seconds.
Safety lockouts prevent the burner from running if the following
conditions are true:
1. + FPM (movement).
2. Actual Temp is higher than Set Temp.
3. 30 minutes of zero GPM (no circulation).
4. Master Switch is On.