Bearcat BC-502/CRC, Instruction Manual

Page: 107 / 164

107
Tank
On the Settings menu, Press the Select
button to highlight “Tank”. A preview of
the available settings is shown. An
optional setting for a tank gauge sender
mounted on the tank that displays the
gauge or (gallons) level on the Console
Display. The sender operates in a range
set by the tank size selected. Press OK to
enter the page.
Defaults
Select and to view all your current settings in
abbreviated and condensed form. Take a picture
and file for future reference in the event of a
computer component failure. Select Back or Next
to leave the page. If you press OK and hold the
Reset for 15 seconds, you will reset ALL settings.
YOU WILL LOSE ALL THE SETUP PARAMETERS.
This is used as a factory initial build tool and will
not fix anything. Only reset these parameters if instructed to do so by the
factory. Again, if you reset the defaults, you WILL lose all of the setup
parameters and you will need to reconfigure ALL the Setup Pages.
Diagnostic Menu
From the Home Page press the Back button to access the Diagnostic
Menu. Displayed in the description box along with instructions are the
Node network communication
indicators. Nodes, (small Grey
boxes mounted in various places)
are small computers with various
input, output, and calculation type
functions. They communicate
through a 2 wire “CAN” network. If
a Node is “off line” or not
communicating, a red indicator
will appear. Select to highlight
buttons on the left. A description