Bearcat BC-502/CRC, Instruction Manual

Page: 65 / 164

65
e. Loosen the
connection at the
supply vessel so it will draw
in air to suck the hose clear.
Do this for three
minutes and then
remove the hose from
the supply vessel,
elevating it to help clean
it. If you wish, draw some diesel through the hose to help clean it.
f. Close Valve A.
g. On Side Control Panel, push “Pump/Valves” (red button).
h. Zero Manual Increase dial.
i. Neutral pump direction.
Loading Through Optional Valve L
Valve “L” (Trough
mounted load valve
and swivel) has the
same function as valve
A. It is located at the
end of the hose trough
on the driver’s side.
Because of its location
and swivel, the hose
can remain attached to
the valve and stored in
the hose trough.