Bearcat BC-502/CRC, Instruction Manual

Page: 109 / 164

109
Switches
Select and OK to enter the switch diagnostic page. Represented on this
page is a switch from every option available (there may be switches you
don’t have). The switch on the screen or display should act just like the
mechanical switch on the Console. If you turn a switch on or off the
switch on the display should mimic the same movement. This is for
diagnostics only. If a problem
arises with a switch or
function, you can check the
computer side of the
electronics by testing the
switch on this page. Switches
on the Console are triggers or
indicators for the computer to
make functions operate. They
are not actually switching
voltage to control the
function. They only switch
signal voltage to the node or
computer. If there is a
problem and the switch is working on the diagnostic page, then the
problem is not the switch.
Side Ctrl
Like the Switches diagnostic page, the Side Control panel has a diagnostic
page. Select and OK to enter the page. The switch on the screen or display
should act just like the mechanical switch on the Side Control Panel. If
you turn a switch on or off the switch on the display should mimic the
same movement. The upper area in black
displays input power voltage and sensor
output power. Sensor Power is a term
used to define a controlled and protected
5v output power used on all switches and
sensors. The lower area in black displays
Manual Increase Speed Pot
(potentiometer) voltage. As you turn the
pot the voltage should range from 0.5v to
4.5v. The Pump/ Valves pull switch will
display a red dot when actuated.