![Bearcat BC-502/CRC Instruction Manual Download Page 108](http://html1.mh-extra.com/html/bearcat/bc-502-crc/bc-502-crc_instruction-manual_2717123108.webp)
BC-502/CRC
108
and instructions will appear in the description box. Press OK to enter the
page.
Volts/Snsr
Various sensor and volt readings at designated Pin locations are
displayed. The Pin numbers refer to pins in the wiring harness on
particular plugs or connectors. The wiring schematic will be needed to
locate the connector or sensor.
Vlv Cmds
Valve Commands displays (in bar graph form) the computers command
output to a function like the product pump. The first line displays the
output command. The second line is the feedback response. If the
computer is asking (output command) the pump to run at 150 GPM, the
Feedback response should be equal. If there was a mechanical problem
like a frozen pump or cold material was prohibiting the pump from
turning at its commanded speed, you would see the difference on the two
bar graphs. No response could also indicate a sensor problem.
Summary of Contents for BC-502/CRC
