Bearcat BC-502/CRC, Instruction Manual

Page: 94 / 164

BC-502/CRC
94
The upper right green light
indicates Manual Operation
and/or Simulate FPM is on.
The large Error light to the
right of the Display also comes
on when either of the small red
lights come on to alert the
operator.
The lower right red light
indicates over speeding the
asphalt pump
The lower left red light indicates a system fault.
Home Page
After power up and the Warning page, the Home page is the default
screen for spreading operations.
GSY
Spread Rate measured in Gallons per
Square Yard (GSY) is the controlled
application rate. The rate can be
changed when the window is selected
(yellow). Use the button below the
“select” icon to
select the GSY
window, then use
the INC/DEC switch
to set the desired rate. The four buttons at the
bottom correspond to the windows above.
Another method to change the rate is (GSY window
selected) to push the button below the “Edit” icon to
enter edit mode. Use the “UP & DOWN” buttons to select the desired
rate, then press “OK” to save and exit edit mode.
FPM
Travel speed in Feet Per Minute is indicated whenever the truck is moving
in forward or reverse. A sensor mounted in the differential picks up
ground speed off the ring gear.