Bearcat BC-502/CRC, Instruction Manual

Page: 80 / 164

BC-502/CRC
80
n. start line. (This might take a little practice).
o. During the shot, you may increase or decrease speed, you may
also change bar width, you can also change spread rate. You must
however, monitor the GPM as to not over-speed the pump’s
capability; (this will affect your application rate).
p. As you get to the end of the shot, have your finger ready on the
Master Switch and roll past the stop line turning OFF the Master
Switch as the Spray bar passes over the stop line. Starting or
stopping the spray while stopped or not moving will result in zero
GPM and cause the spray pattern to drizzle or streak, you must
have movement.