Bearcat BC-502/CRC, Instruction Manual

Page: 100 / 164

BC-502/CRC
100
Flush Time
During the Flush cycle, there are 3 processes.
1. Flush Cycle 1 (purges asphalt from the
spray bar).
2. Flush Cycle 2 (circulates solvent from the
Flush Tank thru the spray bar and back to
Flush Tank). During this cycle the spray
valves can be operated if desired.
3. Flush Cycle 3 (returns solvent back to
Flush Tank).
During Flush Cycle 2, the time the solvent
circulates in the spray bar can be adjusted up
or down by selecting FlushTM, pressing Edit
and raising or lowering the time with the Up or
Down buttons. Press OK to save and exit edit
mode. If you are spraying paving grade
asphalt, you may want to increase the
circulate time for better or more thorough flushing.
Cal 1
On the Settings menu, Press the Select button to
highlight “Cal 1”. A preview of the available settings
is shown. Press OK to enter the page.
Calibration Page
Additional factory settings and adjustment features.
F-Cal
(Footage Calibration) is used to calibrate distance and speed monitoring
equipment on the machine. The Spread Rate calculation is expressed as