Baumuller b maXX 5000, Instruction Handbook Manual

Page: 212 / 330

Monitoring
Instruction handbook b maXX 5000
Document No.: 5.09021.16 Baumüller Nürnberg GmbH
212
of 328
8.3
8.3 Monitoring
8.3.1 Monitoring BM50XX
The controller unit monitors the device during operation. If the controller unit detects a
state that deviates from the normal operation condition, the device generates an error
message.
Error message If the controller unit detects that the device is not working error-free, then this is shown
via the LEDs H1 to H4 (see
Z Display and operating elements – as from page 90 for de-
vices without safety function and see Z C.4 LED display BM5030 with safety function – as
from page 306 for devices with safety function).
For further information see Z Troubleshooting and Fault correction – as from page 227.
8.3.2 Monitoring BM51XX, BM53XX
The controller unit monitors the device during operation. If the controller unit detects a
state that deviates from the normal operation condition, the device either generates a
warning or an error message.
Warning If the controller unit detects an operating condition that exceeds a warning threshold, a
corresponding warning is shown on the display or, respectively, controller. The most im-
portant warning message (Current limit reached) is also shown by the device through the
LED H13 or H23 (see
Z Display and operating elements – as from page 90).
Error message If the controller unit detects that the device is not working error-free, then this is shown
via the LED H14 or H24 (see
Z Display and operating elements – as from page 90). A cor-
responding error code will continue to be shown on the display and/or a controller can
read out the error code on the device.
For further information see Z Troubleshooting and Fault correction – as from page 227.