Baumuller b maXX 5000, Instruction Handbook Manual

Page: 153 / 330

1C1, 1D1 Connections for the DC link, see Z Figure 77 – on page 160.
X2 Connections for pulse enable, etc. see Z X2 Digital inputs/outputs – on page 177
X7 Encoder evaluation
X107 Motor connection BM5326, BM5327, BM5328, see Z Figure 77 – on page 160
1U2, 1V2, 1W2 Connections for the motor BM5334, BM5335, see Z Figure 78 – on page 161.
Connections for the motor BM537X, see Z Figure 79 – on page 162
X200 Connections for 24 V voltage supply; for additional information, see Z Figure 77 – on page
160 (SELV/PELV).
X206 Connection for 24 V voltage supply for the motor brake, see Table X206 on Z page 168 – .
For connector assignment see Z X206/X207/X208 – as from page 198.
X207 Connections for motor temperature and motor brake of motor 1,

see table X207 on Z page 169 – .

For connector assignment see Z X206/X207/X208 – as from page 198.
X208 Connections for motor temperature and motor brake of motor 2,

see table X208 on Z page 169 – .

For connector assignment see Z X206/X207/X208 – as from page 198.
X300 Signal bus
Installation
Instruction handbook b maXX 5000
Document No.: 5.09021.16
153
of 328
7