WARNING!
Danger due to faulty installation and initial commissioning!
Installation and initial commissioning require qualified personnel with adequate expe-
rience. Faulty installation can lead to life-threatening situations or substantial material
damage.
Therefore:
m
Only allow installation and initial commissioning to be performed by employees of
the manufacturer or by other qualified personnel.
DANGER!
Risk of fatal injury from electrical current!
Inevitably, when operating this electrical device, certain parts of it are energized with
hazardous voltage.
Therefore:
m
Pay heed to areas on the device that could be dangerous during the electrical in-
stallation.
m
Pay heed to areas on the device that could still be electrically energized after op-
eration.
Figure 52:
Hazard areas during electrical installation
DANGER!
Risk of fatal injury from electrical current!
The devices
b maXX
5000
are
not
conform with the automatic disconnection of the
supply unit from the power supply system in case of an insulation fault, required in
EN60204-1 (section 6.3.3).
Therefore the plant operator is responsible for the installation of an appropriate insu-
lation monitoring device, separating the devices
b maXX
5000
from the power supply
system to prevent dangerous touch voltages in case of an insulation fault.
Safety notes
Instruction handbook
b maXX
5000
Document No.: 5.09021.16
Baumüller Nürnberg GmbH
124
7.1
