５‐３４
8-2. Adding a Design through the COM port.
1)
Press the Design Loading/Downloading key
.
2)
Use the Jog keys to select a design in Memory to add the design to.
3)
If the selected Memory location has a design loaded in it, the
icon will show
above the D-key.
Press the C-key,
to show the Design information.
*Refer to “
Chapter 6, 2. Design Information”
for details.
4)
Press the D-key,
to confirm adding a design.
5)
Use the F-key,
to select a different Tape code, if needed.
*Refer to “
Section 8-1.
Loading a New Design through the COM port”
in this chapter for details.
The E-key
is for changing the COM speed.
*Refer to
“Section 8-1. “Loading a New Design through the COM port
” in this chapter for details.
6)
Press the G-key,
to ready the machine for the download.
7)
Have the connected device ready and send the design.
Summary of Contents for BEXT 120V
Page 1: ...B E X T Instruction Manual...
Page 13: ...Warning Labels Contents Hook Warning Label Belt Warning Label...
Page 20: ...1 Appearance and Components...
Page 21: ......
