４‐３
1-2. Direct Needle
Instructions for selecting a specific needle
1.
Press the Needle Change key
and the following Color Change screen will
display.
2.
The needle number in the box shown in parenthesis is the new needle number you
want to change to directly.
Press the C-key
to select the next smaller needle number.
Press the D-key
to select the next larger needle number.
Press the E-key
to change needle.
3.
The needle number can be changed by using the Numeric Entry Dialogue.
Press the F-key
to use the Numeric Entry menu.
Please refer to “
Chapter 3, 13. Numeric Entry
”, to input a new value.
Note: Note:
When the machine is first powered on, the machine must be oriented to
the correct stop position to make a needle change. In this case, after following the steps
above, the D14 message will display, prompting you to press the start key to execute
the needle change.
If the D14 message appears, press the start-key
to continue.
Summary of Contents for BEXT 120V
Page 1: ...B E X T Instruction Manual...
Page 13: ...Warning Labels Contents Hook Warning Label Belt Warning Label...
Page 20: ...1 Appearance and Components...
Page 21: ......
