Barudan BEXT 120V, Instruction Manual

Page: 126 / 284

7 - 11
3. Adding Stitches
Instructions for adding stitches in a design
This function is not available during Drive mode.
3-1. Adding running or jump stitches using the Jog keys
This operation moves the pantograph with the Jog keys to add stitches into the design.
1) Press the Design Edit key .
2) Press the A-key to open the Stitch addition menu.
3) Press the C-key to change the mode of adding Jumps or Running stitches.
You can see what mode you are in by looking at the Icon in the top left corner of the
display. The screen above shows the mode to add Jump stitches.
: Mode to add Jump stitches
: Mode to add Running Stitches (Needle Drops)
4) Use the Jog keys to move the pantograph to the point where you want to add stitches.
5) Press the G-key to save the added stitch data to the Memory design data.
6) Press the Design Edit key again to go back to the Start Menu.