4‐14
Yellow point (reversed) : This is a selected non-active point (no *) This is the location where this
point was last set for reference. If this code was never set before, this
location is set to the pantograph origin point.
Red letter : This is the current position of the pantograph and it also displays the
currently selected point code to be registered.
The B displays the current position of the pantograph, from the machine origin point in
0.1 mm increments.
The B display position moves around the four corners of the screen away from the
pantograph’s positions.
C shows the list of position codes. Selected codes are highlighted. .
Codes with an “
*
” mean it’s an active registered code.
Press the A-key again,
to exit and return to the Multi-point screen.
5)
Select a Position code to register.
Press the B-key
or C-key
to select a code.
Summary of Contents for BEXT 120V
Page 1: ...B E X T Instruction Manual...
Page 13: ...Warning Labels Contents Hook Warning Label Belt Warning Label...
Page 20: ...1 Appearance and Components...
Page 21: ......