8
‐１５
Press the E-key
when finished to go back to the Program list.
7)
Use the up and down Jog keys to select the item you want to change.
：
Sets the border width around the pattern in millimeters.
：
Sets the border height around the pattern in millimeters.
：
Sets the distance between patterns in the V(X) direction in millimeters.
*The distance is measured from the center of the patterns (start point).
：
Sets the distance between patterns in the H (Y) direction in millimeters.
* The distance is measured from the center of the patterns (start point).
：
Sets the pattern repetition in the V(X) direction.
：
Sets the pattern repetition in the H(Y) direction.
8)
Press the A-key
to decrease the setting value.
Press the B-key
to increase the setting value.
Note: Press the D-key
to change values using the Numeric Entry Menu.
*Refer to “
Chapter 3, 10. Numeric Entry”
for details.
9)
Press the C-key
to set the border shape. (Square or circle)
Summary of Contents for BEXT 120V
Page 1: ...B E X T Instruction Manual...
Page 13: ...Warning Labels Contents Hook Warning Label Belt Warning Label...
Page 20: ...1 Appearance and Components...
Page 21: ......
