Barudan BEXT 120V, Instruction Manual

Page: 171 / 284

9 - 17
11. High Speed Float (By Color Change)
Instructions for floating to a specific color change in the design data
*This function is only available when operating Float in Drive mode.
1) Press the Float key and the Float screen appears.
2) Press the D-key to go back to the previous color change.
Press the E-key to advance to the next color change.
* Repeat Designs. Press the D-key or the E-key to advance to the next
repeated design as followings.

The current stitch number needs to be near the end of the design to advance
to the next repeat design, or near the beginning of design to back up into the
previous repeat design.
3) Press the G-key to move the Pantograph to the selected color change position.