Barudan BEXT 120V Instruction Manual Download Page 255

Page: 255 / 284

11 - 48

14. Schedule

Memos can be written and displayed on days specified by calendar schedule.

On the days a memo is scheduled, it will be displayed when the machine is powered on.

14-1. Schedule memo

Write a memo for the calendar.

Press the Preference key

Press the G-key

Press the F-key

The Schedule is displayed.

Press the A-key

to toggle the display from the first half of the year to the

second half of the year.

Press the D-key

to back the calendar by one year.

Press the E-key

to advance the calendar by one year.

Summary of Contents for BEXT 120V





























































































































































































































































































Search results

Summary of Contents for BEXT 120V

Reviews:

Related manuals for BEXT 120V

Brands by name

Popular brands

Barudan BEXT 120V, Instruction Manual

Search results

Summary of Contents for BEXT 120V

Reviews:

Related manuals for BEXT 120V

Brands by name

Popular brands