Barudan BEXT 120V, Instruction Manual

Page: 51 / 284

４‐９
6. Bobbin Counter
The Bobbin Counter stops the machine and trims the bobbins, when a preset number
of stitches are sewn.
By setting the number of stitches where a particular design normally runs out of bobbin,
the bobbins can be replaced, avoiding missed stitches in the final sew out piece.
When the machine stops for the bobbin counter, it shows the Bobbin counter message
below and the Green LED on the Tension assembly is turned on. By pushing the Start Key,
the counter is automatically reset.
Set the counter to 0 to cancel the Bobbin Counter feature.
*Bobbin Counter setting can only be set by 100 stitch increments.
(For example, if you try to set a value of 250, the setting changes to 300 stitches.)
1. Press the Manual Key to display the Manual operation screen.
2. Press the D-key .
3. The following Bobbin Counter screen displays.
The number on top is the current count number.
The number below is the new count number being set.
The current number is the count number previously set.