Barudan BEXT 120V, Instruction Manual

Page: 283 / 284

１３‐１２
Message
(Code)
Description Trouble shooting
D41
Chenille Needle Height
Error
This error occurs when the needle bar height or
cancel position is wrong. Turn off the machine and
reboot. If still a problem, turn off the machine. Then
manually rotate the (needle bar) leveling shaft on
the problem head and see if the needle bar drive
levers inside move smoothly and freely and not in a
bind. Fix and correct any binds in the levers before
turning the machine on again. Then, rotate the shaft
to the lower position and see if the LED for Needle
height origin sensor lights when engaged.
Call Tech support for further help.
D42
Chenille Error This Chenille error occurs when there's a problem
other than D38 to D41.
Its’ most likely a stepper driver board problem in the
Chenille Drive box.
Call tech support for help.
D43
Presser Set Error Call Tech support.
D44
Lock Stitch Zig-Zag Driver
Call Tech support.
D45
Lock Stitch Zig-Zag
Tension
Call Tech support.
D46
Lock Stitch Zig-Zag Error
Call Tech support.