６‐５
Press the A-key
to show the Needle drop points of the selected design.
Press the A-key
again to go back to the previous display.
Press the C-key
to display the design of before and after Program changes.
* If there are no Program changes, this icon is not displayed.
Press the E-key
to change the calculation mode for estimated remaining time
(R.Time).
There are 2 calculation modes for R.Time, as follows:
Standard mode : This mode considers production efficiency like thread cuts, and
automatic slowdowns in speed while sewing, when calculating.
High efficiency mode : This mode doesn’t consider production efficiency, when
calculating.
When high efficiency mode is selected, the
icon will be highlighted with a yellow
background
* The calculating mode for estimating remaining time affects all designs in memory and while
sewing.
Use the F-key
to turn the Secondary information display On or Off.
Use the G-key
to toggle between Needle colors and Chenille looper colors.
Summary of Contents for BEXT 120V
Page 1: ...B E X T Instruction Manual...
Page 13: ...Warning Labels Contents Hook Warning Label Belt Warning Label...
Page 20: ...1 Appearance and Components...
Page 21: ......
