Barudan BEXT 120V, Instruction Manual

Page: 146 / 284

8
‐１０
4. Applique and Frame Offsets using the Jog keys
By moving the frame with the Jog keys, you can set the “A.H.offset” and “A.V.offset” for the
“Applique” parameter, or set the “F.H.offset” and “F.V.offset” for “Frame” parameter.
1) Press the Design Edit Key .
2) Select a design and press the B-key icon to open the Program list.
3) Use Jog keys to select one of the following parameters that you want to program.
“A.H.offset”
→
Program setting #8, for Applique offset in the H direction.
“A.V.offset”
→
Program setting #9, for Applique offset in the V direction.
“F.H.offset”
→
Program setting #11, for Frame offset in the H direction.
“F.V.offset”
→
Program setting #12, for Frame offset in the V direction.
4) Press and hold the Origin key to display the set up screen for the offset.
(Caution! This action moves the frame to the origin set point of the design)
The red square displays the current design position.
The blue square displays the design size.
A Displays the selected offset parameter.
B Displays the current design position. (in 0.1 mm units)
C Displays the current amount of offset. (Left box: 1mm units Right box: 0.1mm units )
C
A
B