8
‐１３
6)
Set the P1 position.
Use the Jog keys to move the frame to the desired lower left corner position.
* Note! Confirm that the P1 position is underlined on the display.
Pressing the A-key
will toggle between the P1 and P2 positions.
7)
Press the G-key
to enter this position for P1.
Afterwards, the display will automatically switch to the P2 position.
8)
Set the P2 location
Use the Jog keys to move the frame to the desired upper right corner position.
9)
Press the G-key
to enter this position for P2.
10)
You can press the B-key
to check and trace the current frame type setting
range.
To confirm whether a design while actually fit in the frame type, use the frame trace
instructions as explained in “
Chapter 9, 5. Trace
”.
Summary of Contents for BEXT 120V
Page 1: ...B E X T Instruction Manual...
Page 13: ...Warning Labels Contents Hook Warning Label Belt Warning Label...
Page 20: ...1 Appearance and Components...
Page 21: ......
