Barudan BEXT 120V, Instruction Manual

Page: 61 / 284

４‐１９
8-5. Using F-List to program point positions
This function can move the frame to a registered point for sewing appliques for example.
The FMP code is used for this function, and you can this function to move to points
positions (PO1 ~P015).
* This function is basically the same as Program setting #7 “Applique”.
However using Program #7 “Applique” only allows one moving position to be set and it’s
based from the stop position of the pattern. The FMP codes allow you to have 15 preset move
positions and they are absolute positions the pantograph moves to.
(Please refer to “ Chapter 8, 2. Program List ” for more details on “ Applique ”)
* Automatic starting as set by MC parameter #13 “Auto start” also applies to this function
when used, just like setting Program #7 “Applique” on.
(Please refer “Chapter 11, 2. “
MC List”
for
“Auto start
” details.)
1) The pantograph can be moved to a position point during sewing by programing a color
change to a FMP code in the F-List, as shown below.
F-List screen of color change functions.
* Please refer to “
Chapter 7, Editing Memory Designs
” for more details on the F-list function.
2) When an FMP code is executed, the pantograph moves to the point position and displays
a “D23” message, after the machine is stopped.