8
‐８
3.
Program Barcodes
Change Program settings for design data using Barcode scanning.
Once in Drive mode, the program settings can not be changed. See the Barcode list for
settings that are available.
3-1. Changing program settings
Scan the following 3 Barcodes to change program settings.
“Program Barcode” to enter Program
settings mode
“ Item and Value Barcode” Indentifies
which parameter item to change and the
new value
“OK Barcode” Saves new setting and exits
Program mode
* The Barcode examples above would be used to change Item 3 “ROT pattern” to 1.
Please refer to “
Section 3-2. Barcode list
” in this chapter to select the appropriate barcode.
1)
Scan the “Program Barcode” to start the process and display the program settings.
2)
Scan “Item and Value Barcode” to change the appropriate program setting.
3)
Scan the “OK Barcode” to Finish and save the new program setting and return to the
normal operation screen.
Summary of Contents for BEXT 120V
Page 1: ...B E X T Instruction Manual...
Page 13: ...Warning Labels Contents Hook Warning Label Belt Warning Label...
Page 20: ...1 Appearance and Components...
Page 21: ......
