４‐１５
8-2. Point Code Registration using the
Jog-keys
Use the Jog-keys to move the pantograph to a desired location for a point code.
1)
Use the
icon to select a code in the Point code list. Refer to “
Section 10-1. Point
Registration
” in this chapter for more details.
2)
Display the Multi-point or Point code selection screen as follows.
(The following Multi-point screen explains how to register a point code location)
3)
Move the pantograph with the Jog-keys to desired position where you want to set a
Point code location.
4)
Press and hold the E-key
to set point code location and activate it.
5)
Press and hold the F-key to activate or de-actvate the selected code.
:Activates the point code so it’s available for use.
:De-activates the point code. It is not available for use.
* Even if a code is de-activated, the last set position is held in memory.
Summary of Contents for BEXT 120V
Page 1: ...B E X T Instruction Manual...
Page 13: ...Warning Labels Contents Hook Warning Label Belt Warning Label...
Page 20: ...1 Appearance and Components...
Page 21: ......
