14
3.3
TOP BOX INSTALLATION
The instructions in this section are intended as a guide to fitting a Top Box to a Triple 7 cabinet.
Standard Top Box Installation.
Ensure the 240V mains supply is disconnected from the cabinet before commencing a top box
installation.
Remove the cover plate from the top of the cabinet by removing the 4 x M6 nuts from the inside
of the cabinet as indicated in the images below. Now lift away the cover plate.
Carefully lift the Top Box to the top of the cabinet and feed the wiring through the large centre
hole.
Align the Top Box bolts with the holes that are situated either side of the large centre hole and
locate the Top Box ensuring it sits flush with the top of the cabinet.
At this point the Top Box can now be secured to the cabinet using the wing nuts supplied. See
first image below.
The Top Box connector is now plugged into the Barbus distribution board. See second image
above.
Reconnect the mains supply to the machine to ensure the Top Box is working correctly.
Remove 4 x M6 nuts
