80
7.2.1 JCM Vega + RC note acceptor Encryption key Reset
If the note acceptor needs to be set to its default encryption key after replacement
using the procedures below.
1.
Power Down the machine and select the note acceptors BANK 1 option switches 1
–
6 to the ON position.
2.
Power up the machine and set option switch 1 to the OFF position and the bezel
illumination will go off then change to blue to indicate that the encryption key reset
process is complete.
3.
Power down the machine and turn all switches OFF on BANK 1 ensuring switches 6 &
7 on BANK 2 are set to the ON position.
4.
Now power up the machine and set up the encryption key as detailed in section 5.7.
The encryption key can be found as the last 6 digits of the serial number on the right
hand side of note head as shown below.
In normal operation option switches 5, 6 & 7 on BANK 2 should set to the ON position for
the correct bezel display and CCtalk mode.
Serial
Number
001395
