70
This menu is used to set up the encryption code for a replacement coin or note acceptor. This
will also be required after a Mech, MPU6 or PC change.
The screen below shows both the note acceptor and coin mech codes. The codes are entered
by selecting the serial number entry icons indicated in the image below.
One the appropriate codes have been entered then select the “Coin mech set up” icon. Once
selected an icon will appear on the screen to indicate that the code has been accepted by the
machine.
Select the ok button and the machine will now reboot. Once the machine has set up check, the
coin and note handling devices in "VALIDATOR TEST" from the main menu to ensure that they
operate correctly.
Serial number entry icons
