92
12. ADDITIONAL SECURITY
777 Security Strap Kit Fitting Instructions (
KS64660
).
The locking bar kit consists of two pieces of metalwork, a left hand bracket that includes the
security strap and a right hand side fixing plate. The kit metalwork is shown in the image below.
Section 1 Fitting Instructions
1. Switch off the machine and isolate from the mains before fitting the security strap kit.
2. Unlock the note acceptor base and then place it to one side to gain access to the right
hand side blanking plate fasteners.
3. Where there is a ticket printer fitted it will be necessary to remove the ticket printer to
gain access to the left hand blanking plate.
4. Remove the left and right hand blanking plates shown in the images below by removing
the M6 nuts and washers. These can now be removed and stored in the bottom of the
machine for future use.
5. Place the left hand bracket onto the side of the cabinet as shown in the first image below
and secure into place with the M6 nuts and washers removed previously.
