81
8.
PAYOUT ASSEMBLY
The payout assembly within the Triple 7’s cabinet consist of two hoppers,
MCL Universal Serial Hopper
MCL 10p Serial Compact Hopper.
Both of these hoppers connect to the MPU6 via the Universal Hopper Connector.
Before carrying out any maintenance on the Payout Assembly, we recommend that the cabinet
power has been disconnected.
The Hopper can be removed for maintenance or replacement by using the following steps.
1. If necessary dump the hopper contents and then turn off the machine via mains switch
on the rear of the machine.
2. The payout assembly can be removed by sliding the unit forwards as shown in the image
below.
3. Once the payout assembly has been removed, place the unit on a flat surface to begin
maintenance work.
