51
Serial Device set up test
This menu is used to set up the encryption code for a replacement coin or note acceptor. This
may also be required after a MPU6, PC change and executive update.
The screen below shows both the note acceptor and coin mech codes. The codes are entered
by selecting the serial number entry icons indicated in the image below.
One the appropriate codes have been entered then select the relevant set up icon. Once
selected an icon will appear on the screen to indicate that the code has been accepted by the
machine.
Select ok on the button and the machine will initialise. Once the machine has set up check, the
coin and note handling devices to ensure that they operate correctly.
Serial number entry icons
