Barco S3 series, User Manual

Page: 248 / 538

7. System Setup
7.18 Programming Menu > Capture Stillstore from Inputs & Backgrounds
General
In this procedure, you will capture the inputs or background inputs as a Stillstored image.
Prerequisite
• Ensure that you are familiar with the Programming Menu . For details on this menu, please refer to chapter "Programming
Menu", page 149.
Captured Stills are used as thumbnails in general in the interface once they are used in a layer or destination.
Capture Stillstore (Stills)
1. Click on the Background or input tab on the top of the left hand side.
2. Click on the Camera icon, the icon changed to a crossed over version and the input is captured into memory.
Image 7-7
3. The Still Store is now available in the Stills tab of the Input Resource tab.
Capacities and limitations
As a reference 100 still stores of 2K resolution can be stored, if the size of the still is bigger, the memory allocation increases allowing
for less number of stills. Image can be imported as described in the Operation Section below.
Still Stores can be used in Backgrounds and Layers, but will need to be added from the right section in the Input Resource tab.
244 R5905948 EVENT MASTER DEVICES 17/07/2017