Barco S3 series User Manual Download Page 137

Page: 137 / 538

6. EM GUI orientation

Output menu – Color submenu

The Output Effects Submenu adjusts color variable of the output image, such as contrast and brightness, saturation, hue and
gamma corrections.

•

The RGB Contrast and Brightness settings are adjustable.
-

The Overall adjustment has a range of 50 to 150.

The individual Red/Green/Blue adjustments have a
range of 25 to 150.

The default setting for all of these properties is 100.

•

Saturation is adjustable within a range of 0 to 150. The
default setting is 100.

•

Hue is adjustable within a range of –90 to +90 degrees.
The default setting is 0 degrees.

•

Gamma is adjustable within a range of 0.31 to 3.29. The
default setting is 1.0.

•

Reset All changes all values to their default settings.

R5905948 EVENT MASTER DEVICES 17/07/2017

133

Summary of Contents for S3 series



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for S3 series

Reviews:

Brands by name

Popular brands

Barco S3 series, User Manual

Search results

Summary of Contents for S3 series

Reviews:

Brands by name

Popular brands