Barco S3 series, User Manual

Page: 134 / 538

6. EM GUI orientation
Assign Menu
• Name: Adjusts the name of the Destination.
• Destination type: Reports the type of destination Screen
or Aux. Can convert from Screen to Aux if it meets
requirements.
• Number of output(s): Reports the number of output
con
fi gurations in the destination.
• Dimension: Adjust the output con fi guration layout .
• Auto con fi gure Output format: Reads the EDID information
of the connected device to acquire its format. If more than
one device is connected to the destination, it reads the
format of the
fi rst output. This feature is not available for
SDI outputs.
• Output(s) format: Adjusts the output format of the
destination. This is applied to all outputs that are added into
this destination.
If you cannot
fi nd the output format in the list, it is possible
that the connector capacity for the connector is too small.
Remove the outputs from the Destination; update the con-
nector capacity; and check again. (Refer to "Con
fi guration
Menu > Adjustment > Output Con fi guration", page 118, and
see the subsections "How to delete Output" and "Output ad-
justment panel > Connector Menu.")
• Outputs: Provides a list of the output con fi gurations
assigned to the Destination.
For Aux destinations, only 1 Output con
fi guration is shown
or is allowed to be de fi ned. From this menu outputs can be
deleted or added as in the output con fi guration menu.
• Layer (only applicable when Destination is a Screen). You
can assign a size to the Layer: SL (2K Single Link), DL
(Dual Link), or 4K. You can also make the Layer either a
Mixing Layer or a Single Layer.
The list shows the Layers assigned to this Destination.
A word about layers
Adding to the general description above about layers, mores speci fi cally a EMP´s Screen Destination has 1 fi xed Mixing layer, its
BG. Then there are a number of mixing layers available in the system.
The E2 has 2 Banks of 8 Mixing Layers for a total of 16 Mixing Layers or 32 Single Layers (32L). These 16 Mixing Layers can be
assigned to Destinations, using up to 4 Outputs (1 Bank). If a Destination uses Outputs from both Banks, the Mixing Layer count is
reduced to 8. An E2 Jr. has a single Bank of 8 Mixing Layers for a total of 8 Mixing Layers or 16 Single Layers (16L).
An S3–4k has 1 bank of 4 Mixing Layers for a total of 4 Mixing Layers or 8 Single Layers (8L). These 8 Mixing Layers can be assigned
to Destinations, using up to 4 Outputs (1 Bank). An S3–4k Jr. has a single Bank of 2 Mixing Layers for a total of 2 Mixing Layers or
4 Single Layers (4L).
Processor Banks Mixing Layers Single Layers
E2 2 16 32
E2 Jr. 1 8 16
S3–4K 1 4 8
S3–4K Jr. 1 2 4
EX NA NA NA
130 R5905948 EVENT MASTER DEVICES 17/07/2017