Barco S3 series, User Manual

Page: 141 / 538

6. EM GUI orientation
Data-doubling submenu—Expert Mode
The top part of the panel is the same in Expert Mode as it is in
Basic Mode. Expert Mode, however, offers greater control over
horizontal and vertical Offset and Size. Expert Mode also allows
the user to add Outputs without increasing the canvas size and
to place those Outputs anywhere within the canvas.
• Data Doubling H or V Overlap width: The adjustment can
be made by moving the slider, entering the value manually
in the box, or clicking on the plus and minus.
Note: The Overlap sliders are disabled, until at least one
overlapping area is selected. Gray overlaps are unselected;
blue overlaps are selected. Individual overlaps can be se-
lected by clicking on the desired overlap in the output im-
age. All overlaps can be selected by clicking on the
Select
All button.
• Once an overlap is created, H and V offset can be adjusted
for Left, Right, or Center justi
fi cation over the Background.
• The Area of Interest (including H Size and V Size) is
duplicated here from the Output tab, so that the user can
adjust the AOI and the X/Y Offset together.
• The icons above the sliders are shortcuts for the offset.
R5905948 EVENT MASTER DEVICES 17/07/2017 137