Barco S3 series, User Manual

Page: 276 / 538

9. General operation example
Image 9-13
4. Now, you can navigate the computer to select the desirable pic by clicking in the black square.
5. After a pic is selected, the image will fi ll the black square as shown below.
Image 9-14
P2: You can skip this step if you don’t want thumbnail images to represent the inputs/sources. In this case,
the layers in the destinations area will be black and noted only by the assigned name.
P2: Select thumbnails for Inputs
1. From the left hand side, click on the Input tab.
2. In the Input menu, click on the Inputs tab
3. Click on the thumbnail button.
4. Click in the black box and navigate the computer to fi nd and select the desired pic.
5. After a pic is selected, the image will fi ll the black square.
6. Repeat this sequence until a pic is selected for each input.
7. When these steps are completed, the section will appear as follows.
272 R5905948 EVENT MASTER DEVICES 17/07/2017