Barco S3 series, User Manual

Page: 70 / 538

5. Front Panel Menu orientation
5.3 Using menu system
General
This section describes the conventions for using the menu system of the Event Master devices. For reference, the following illus-
tration shows the
System Menu.
Image 5-3
System menu
The unit’s display screen is four lines high. Throughout this chapter, entire menus are shown for ease of
reference, unless otherwise noted.
Please note the following important menu rules and conventions:
•
The top line names the current menu, in upper-case letters.
• Subsequent lines typically display two fi elds:
- For a function , the left-hand fi eld names the function. The right-hand fi eld shows the function’s current parameter (or value).
In the preceding illustration, Black Invalid is a function and On is its current value.
- For a submenu , the left-hand fi eld names the submenu that you can access. The right-hand fi eld displays a double arrow
(>>), indicating that a submenu is available. In the preceding illustration, USB Backup/Restore and Ethernet are two of
the available submenus. To use a submenu, scroll to it and press SEL . Then scroll through the list that appears.
- The navigation cursor (>) in the left-hand column indicates the current line on which you can take action. This arrow moves
as you rotate the ADJUST knob on the front panel. When you reach an editable fi eld and press SEL , the navigation cursor
changes to an edit cursor (#).
Making a menu selection
To select a menu item, use the ADJUST knob to scroll to the item, then press the SEL button on the front panel:
• To scroll through a menu:
-
Turn the ADJUST knob counter-clockwise to scroll down.
- Turn the ADJUST knob clockwise to scroll up.
• To open a submenu, scroll to the submenu line and press SEL .
• To change a parameter, scroll to the desired line and press SEL . The navigation cursor changes to the edit cursor. Use the
ADJUST knob to modify the value:
- Turn the ADJUST knob clockwise to increase a value.
- Turn the ADJUST knob counter-clockwise to decrease a value.
• Then press SEL to accept a parameter or value. The edit cursor changes back to the navigation cursor.
You must press SEL to accept the value.
Throughout this user’s guide, the term “select” is used as an abbreviation for “scroll to a menu line and press
SEL.”
Example: Select the Ethernet menu to begin con fi guring network settings.
Exiting a menu
• In the edit mode (i.e., the edit cursor is visible), press ESC to exit a menu without changing the original parameter.
• To navigate back up the menu structure, press ESC again. Each press takes you back up the menu tree by one level.
66 R5905948 EVENT MASTER DEVICES 17/07/2017