Barco S3 series User Manual Download Page 450

Page: 450 / 538

14. S3 Maintenance

14.20 Top Cover

Image 14-47

Necessary tools

1 x Phillips Screwdriver #2

How to remove Top Cover

1. Remove the 12 screws from the two sides (6 in each side, 4-40x0.25) that are located towards the top side of the unit.

Image 14-48

2. Remove the 5 screws (6-32x0.25) located on the top at the back of the chassis.

3. Remove the cover by gently pulling it away from the unit.

How to install Top Cover

To install the Top Cover follow the same procedure in the reverse order.

446

R5905948 EVENT MASTER DEVICES 17/07/2017

Summary of Contents for S3 series



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for S3 series

Reviews:

Brands by name

Popular brands

Barco S3 series, User Manual

Search results

Summary of Contents for S3 series

Reviews:

Brands by name

Popular brands