Barco S3 series User Manual Download Page 414

Page: 414 / 538

13. E2 Maintenance

13.34 Top Cover

Image 13-91

Necessary tools

1 x Phillips Screwdriver #2

How to remove Top Cover

1. Remove the 12 screws from the two sides (6 in each side, 4-40x0.25) that are located towards the top side of the unit.

2. Remove the two (2) screws (4-40x0.25) located closer to the rear end of the unit. These are

at head screws.

3. Remove the 8 screws (6-32x0.25) located on the top at the back of the chassis.

4. Remove the cover by gently pulling it away from the E2

Image 13-92

How to install Top Cover

To install the Top Cover follow the same procedure in the reverse order.

410

R5905948 EVENT MASTER DEVICES 17/07/2017

Summary of Contents for S3 series



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for S3 series

Reviews:

Brands by name

Popular brands

Barco S3 series, User Manual

Search results

Summary of Contents for S3 series

Reviews:

Brands by name

Popular brands