![background image](http://html1.mh-extra.com/html/barco/s3-series/s3-series_user-manual_3891629136.webp)
6. EM GUI orientation
Output menu – Main submenu
Operate similarly to the Output adjustment panel > Main menu.
•
Test pattern:
Turns the Test Patterns ON and select the
desired type. The default setting is OFF. Test pattern types:
– Horizontal Ramp
– Horizontal steps
– Vertical Ramp
– Vertical steps
– 100% Color Bars
– White
– 16x16 Grid
– Black
– 32x32 Grid
– SMPTE Bars
– Burst
– H Alignment
- –75% Color Bars
– V Alignment
– 50% Gray
– H V Alignment
– Circle Alignment
•
Raster box:
Turns ON or OFF on a raster around
the default active area. This raster box is a white,
single-pixel-wide broken line.
•
Diagonal Motion:
Turns the Diagonal Motion ON or OFF
for select patterns:
-
The motion is a bottom-right to top-left diagonal for
16x16, 32x32 grid.
-
The motion is right to left for 100% Color Bars.
-
There is no motion in Horizontal and vertical Ramps and
other patterns.
•
Area of Interest (AOI):
A raster box that can be positioned
and sized within the outputs active area, it effectively makes
the AOI the new active area.
This raster box is a green, single-pixel-wide broken line that
helps you adjust the AOI within the output’s active area The
handles for the AOI menu are:
-
H Size and V size: Adjusts the horizontal and vertical
positions respectively.
-
H Pos and V pos: Adjusts the horizontal and vertical
positions respectively.
-
Note a lock button allows user to lock the aspect ratio
of the size.
•
Reset button:
resets the AOI to default which is the full
output area.
Operate similar as the Output adjustment panel > Main page. See above.
132
R5905948 EVENT MASTER DEVICES 17/07/2017
Summary of Contents for S3 series
